Elevator UV Sterilizer – ضوء فوق بنفسجي للمصاعد

الحفاظ على نظافة وتطهير المصاعد بشكل فعال باستخدام مصابيح UV-C للمصاعد الذكية. يصل إلى 99% فعالية التطهير وتصميم آمن لتجنب تعرض الركاب للأشعة فوق البنفسجية.
Add value to your property.

تحديد:

The ULTRAVIOLET LIGHT FOR ELEVATORS (Touch-Free Elevator Disinfectant Technology) is available for new installation elevators or the renovation of existing elevators or lifts.

UV-C germicidal lamp with 253.7nm wavelength, the disinfection efficacy is up to 99%

The lampshade will open and the lamps will automatically turn on for 30 minutes of disinfection when receiving the elevator signal. The lamps will turn off and the lampshade will be closed automatically when someone uses the elevator. When passengers leave, it will restart the disinfection process.

The lamp system is designed with an infrared biometric recognition system to shut off (or switch on when people left)automatically when it detects humans or other living things. On-time on/off settings. With voice reminder function. Voice reminder for the people who accidentally enter the elevator or room when the elevator or room is in the disinfection

Interface: Elevator idle signal interface or dry contact digital.

شهادة CE.

Parameters:

قوة200-240 الخامس
UV lamp power20 دبليو
Total size851*72*56(مم)
UV lamp life8000 hours
UV intensity90.2 uw/cm²
Antivirus range20
Human detection distance3~6 meters
weight3.5 كلغ

UV-C disinfection lights -Size


UV-C disinfection lightsWiring

Intelligent control

  1. When receiving the elevator signal, the lamps will turn on/off automatically and start the disinfection (Standard disinfection time is 30 دقائق). The disinfection process will stop immediately when it detects the door is open or the elevator is using. After passengers leave the elevators, the lamps will turn on and start the disinfection process again.
  2. Clock function. On-time turns on/off the disinfection process setting.
  3. Cumulative statistics of the usage time of ultraviolet
  4. Voice reminder function. Voice reminder for the people who accidentally enter the elevator when the elevator is in the disinfection. The voice reminder when the disinfection lamp is damaged. And remind to replace the lamp when the life is

Working Modes:

  1. Office or Residential mode. If it receives the idle signal of the elevator, it will turn on the ultraviolet lamp for 30 دقائق. If it receives the operation signal of the elevator or the infrared human motion sensor senses the biological movement in this process, the ultraviolet lamp will be turned off immediately. If the entire antivirus program is less than 30 دقائق, the next time it receives an idle signal, it will start the antivirus program again for 30 دقائق. After 30 minutes of complete antivirus, wait 8 hours and restart a round of antivirus. The factory defaults to this mode.
  2. Medical mode. When the elevator idle signal is received, the UV lamp is turned on for 30 دقائق. When the elevator operation signal or infrared human motion sensor senses biological movement during this process, the UV lamp is turned off immediately. If the entire antivirus program is less than 30 دقائق, when it receives an idle signal next time, the antivirus program will be started again for 30 دقائق. After 30 minutes of complete antivirus, wait for 2 hours and restart a round of
  3. The user can customize the week and time period for antivirus.

elevator uv sterilizer

Q&أ:

6.1 The working indicator of anti-virus system is off

Please check whether the power cable is firmly connected. Make sure the input voltage is normal (AC180V ~ AC235V).

6.2 After the clock is set, it cannot be saved.

Please replace the built-in button battery, a professional one is required.

6.3 The UV lamp cannot be lit.

Check whether the work indicator has been lit.
Please listen to the voice broadcast whether the UV lamp is damaged. Connect the device via Bluetooth to check the fault code.

Remarks:
All faults can be viewed via Bluetooth. If the problem has not been solved, please contact the place of purchase.

6.4 How to clean the lamps

To wipe the lamps with 95% alcohol after the installation of the UV-C disinfection system. Clean the lamps once a week to ensure the best performance.

Send us mail