In this article, we will talk about infection control and prevention in elevator cars with an elevator air purifier.
- What is an elevator air purifier?
- How does an elevator air purifier work? Do we really need an air purifier for elevator cars?
- How to choose the right elevator air purifier for my property?
- How to install the elevator air purifier?
- What needs to do for the maintenance of the elevator air purifier?
All You Need to Know About Elevator Air Purifier
What is an elevator air purifier?
The elevator air purifier also calls an elevator car air sanitizer. It’s part of the elevator air purification, disinfection and ventilation system. Usually, the elevator air purifier will be designed with filters (Dust filter, Cabon filter, Nano Tio2 filters. Some units even designed with HEPA filter for better performance) for air purification. Some elevator air purifiers are supplied with fans for ventilation/ air circulation purposes as well. Fully-enclosed UV-C lamps are usually used for disinfection purposes.
While some elevator air purifiers are installed on the elevator car top, some manufacturers are supplying small size air purifier for elevator car wall-mounted or ceiling-mounted purification.
How does an elevator air purifier work? Do we really need an air purifier for elevator cars?
Instalado na parte superior da cabine do elevador, it’s safe and no side effects on human bodies. O purificador de ar de carro de elevador ALAP é projetado para filtragem de ar de circulação, desinfecção e ventilação. It’s effective for infection control and prevention.
As people love elevators, we take elevators every day. 3-4 times on average every day. We’ve heard many infection cases within this narrow space. The elevator air purifier can effectively eliminate cross-infection caused by breathing and sneezing of personnel.
How to choose the right elevator air purifier for my property?
When choosing air purifier for elevator cars, it’s important to take care of the size, cabinet capacity and application environment. Anyway, we have to increase the rates for cycle air purification, such as to filter 100% of the air in a typical elevator cabinet 15-20 times per hour or more. It’s important for the elevator car air purifier to be designed for continuous operation.
Take ALAP-18F elevator air purifier for instance, the weight is only 13.5kgs, the airflow rates is around 330m³/h. It’s available for elevator cabs with a loading capacity of less than 1350kgs. For 1350-2000kgs capacity, the ALAP-36F will be needed.
ALAP elevator air purifier is designed with auto dust-removal function. This will help to keep a high performance for 7*24 hours operation. Também, there’s a control panel to indicate the status of the filters, UV-C lamps and error alarm. It’s controlled by a programmable remote controller.
How to install the elevator air purifier?
The installation is easy. It will take 1 worker 40-50 minutes for the installation and commissioning.
① Determine the air supply/outlet hole (Dimension: around 380*50mm)of the purifier. It is recommended to use the original fan hole on the elevator. When installing the purifier, remove the original fan, align the air outlet of the purifier with the fan port on the car top, and fix the purifier on the car roof with screws. The elevator air purifier needs to be stably installed to avoid vibration while operating. Use/Stick the Heat Insulation Sponge (We have supplied this for easy installation) whenever it’s necessary.
② Determine the air return hole of the purifier. You can use the original fan air outlet on the elevator or open a new rectangular hole as the return air hole. Fix the return air hood, and then connect it to the elevator air purifier with an air duct.
③ Put the remote control receiving probe and display panel of the purifier into the elevator car through the air supply hole. Stick it on the elevator car and connect it to the electricity.
④ Turn on/off the elevator air purifier with the remote controller or set the timing switch on/off time based on your requirement, and the elevator air purifier will be auto-operation based on the setting.
What needs to do for the maintenance of the elevator air purifier?
For best performance, the filters need to be cleaned or replaced after a period of time. The active carbon or medium/high-efficiency filters usually needs to be changed every 3-6 months. The UV-C lamps can be replaced after 5000 horas.
Keep elevators clean with UV disinfection – UV-C disinfection light for elevators
Ultraviolet light for elevators – Catálogo
Ultraviolet light for elevators – Relatório de Teste de Eficácia de Desinfecção
The ULTRAVIOLET LIGHT FOR ELEVATORS is available for new installation elevators or the renovation of existing elevators or lifts.
Lâmpada germicida UV-C com comprimento de onda de 253,7 nm, a eficácia da desinfecção é de até 99%
O abajur se abrirá e as lâmpadas se acenderão automaticamente por 30 minutos de desinfecção ao receber o sinal do elevador. As lâmpadas serão apagadas e o abajur será fechado automaticamente quando alguém usar o elevador. Quando os passageiros saem, ele reiniciará o processo de desinfecção.
O sistema de lâmpadas é projetado com um sistema de reconhecimento biométrico infravermelho para desligar (ou ligar quando as pessoas saem) automaticamente quando detecta humanos ou outros seres vivos. Configurações de ligar/desligar no horário. Com função de lembrete de voz. Lembrete de voz para as pessoas que acidentalmente entram no elevador ou sala quando o elevador ou sala está em desinfecção
Interface: Interface de sinal de elevador ocioso ou contato seco digital.
Certificado pela CE.
|poder da lâmpada UV||20 C|
|Vida útil da lâmpada UV||8000 horas|
|Intensidade UV||90.2 seu/cm²|
|Gama de antivírus||20 m²|
|Distância de detecção humana||3~6 metros|